Category Archives: Site seeing

Posts regarding site seeing for that day.

Site Seeing – April 17

Extreme weathering on our models is sometimes criticised as being unrealistic, and to a degree I can understand why many people would say that. But, that is not always the case so long as you have a modelling situation, or photographic evidence to the contrary. Today’s site seeing looks at prototypical examples of extreme weathering.

Site 1: Railpictures.net – image by Logan Allen

In the first image by Logan Allen an ex ATSF CF7 #2627 returns to service on August 8th 2014 after being “dead-lined” for months prior, due to engine and truck issues. Click on the image for the full size photo.

To be noted in this photo are:

  • Faded and worn out paint surfaces, note the mismatched colours and faded nature of all of the surfaces
  • Rust patches and rain marks from the large surface rust patches under the degraded paint
  • Dirt, dust and grime on the undercarriage and trucks, specific to the area (note the light brown colour of the dirt matches the dust on the unit)

Thanks to Logan Allen for allowing the use of the image.

Site 2: Railpictures.net – image by Joe Vittitoe

This photo is of former Southern Railway SW 9 (SOU 1177) as she sits in a scrap yard in Harriman, Tennessee on April 20 1988. Items of note on the locomotive:

  • Rusting on the bottom of the hood doors, and lower body side nearest the photographer
  • Dirt and dust picked up on the coupler face – note how the painted stripes have worn off by the abrasive nature of the stuff
  • On the top of the hood there’s oil and dirt and soot, and its run down the side of the hood due to rain
  • Extreme fading of the originally black paint to a dusty grey, and the same applies to the bogies and under carriage all are now a standard dusty grey

I’ve sent Joe an email from the Railpictures site asking him for permission to use the image, but have not heard from him by post time. Image is copyright Joe Vittitoe. Let me know if you have any information on the photographer. If needed I may have to take the image down if later contacted.

Site 3: Railpictures.net – Image by Ron Flanary 

Quite apart from the great rust and weathering detail in the picture there’s lots of history. L&N 2376 was new in 1941 when purchased by the Nashville, Chattanooga & St. Louis. Then she carried the number 1, the lines first ever diesel-electric locomotive.

When that road merged into the L&N in 1957 the loco became L&N number 30. The last change for the old girl was during the late 1960s when she was re-engined with an EMD 567-C prime mover from a retired E-unit.

This photo taken in 1974 shows the EMD 567 engine shoe horned into the hood. Three years later in 1977 number the railroad retied and scrapped 2376. Here endeth the history lesson.

Onto the weathering lesson:

  • Faded paint all over the body, note the different shade on the top of the loco by comparison to the sides,
  • There’s roof rust here too but not so much as the RS-3 in the background (at least I’m pretty sure it’s an RS-3)
  • Oil spills and dirt accumulation around the base of the cab near the walkways as well as road-grime and muck on the trucks, under-body and on the coupling faces, and finally
  • Look at all the rain weathering dragging down the sides of the locomotive

Thanks go to Ron Flanary for allowing me to share the photo.

I hope that you enjoyed the photos and the weathering lessons that you can learn from them. Drop me a line in the comments if you feel so inclined. All the best and a good Friday night from a cold and rainy Ballarat.

Site seeing – March 31

If you’re a regular reader of the blog, you’ll know that I’ve had some health challenges in the last week. It is perhaps fitting today, for the last day of March, that we look at objects other than me in need of repair.

I love a good wrecked model railcar, especially when they’re done right. Unfortunately scaling down a wreck is not easy. Plastic is not steel, especially in scale and so plastic tends to be an order of magnitude thicker than steel would be in a scale model. Getting it right is more an art form than a science. Which leads us to today’s sites…

Site 1: Model railroad hobbyist forum (Link here)

Over on the MRH Forum there’s a thread running on ‘Train Wreck Experiments with a heat gun and weathering’.  I really like the work that went into this unit. And there’s some great advice on modelling wrecks from those in the know on this thread.

Site 2: Model railroad hobbyist forum (Link here)

Also on the MRH forum is another thread at the moment on dents and dings on cars. There are some reall good comments starting to come out in the conversation, and some great pictures as well like this one by Verne Niner:

Read on for some more great ideas.

Site 3: Jeff Eggert’s Yard Office (Link here)

I’ve vistited Jeff’s website again, and again, and again. His scratchbuilt grain hopper (linked here) is a masterpiece, and in line with today’s dent, bent and rent theme. I hope that you enjoy.

Talk to you again in April.

Site Seeing March 22

Bound for South Australia

Small, smart, practical exhibition layouts are not as easy to find as I’d like in Australia. Most club layouts are huge affairs, requiring many willing hands, a box trailer or van, and a pioneering spirit to move from home to exhibition to home.

Site 1: “Commercial Road” – 1960s South Australian Railways (Link Here)

One such layout that just popped up on my radar on Thursday is the Commercial Road layout of Gavin Thrum of South Australia. If you’ve not come in contact with the railways of South Australia before then you are in for a real treat.

Commercial Road – view the website for more great pictures of the layout

The South Australian railways are an interesting study in Multiculturalism. Originally built to English standards,  and operating practices, in 3 gauges (Irish Broad at 5′ 3″, Standard Gauge at 4′ 8 1/2″, and Narrow Gauge at 3′ 6″) the states rail system was a hodge-podge of types and wooden bodies goods and freight wagons until 1922 when the state’s worst financial deficit reared its ugly head.

To the rescue rode Commissioner William Webb (of the Missouri Kansas and Texas RR) and from 1922 Mr Webb revolutionised railroading in the south.

Engine 502 – 1953 – Public Domain Image courtesy of Wikipedia (more detial below)

Speed signalling, large steam engines, metal freight cars, Brill railcars, and more became the norm. Today there are still three gauges in use and lots of action through the state and in Adelaide where electrification has finally arrived (link here); Very similar to the Victorian VLocity diesel railcar (link here) that I travel in down to Melbourne. (I love electric traction)

But I digress; back to the layout. It’s a great small layout measuring 10′ 10″ long by just 13″ wide. Hop on over to his site and take a look at the images and the modelling. Really well worth a visit.

Resources

Wikipedia article on the SAR – Link Here

More on the big steamers of the Web Era

Site seeing March 20

I’ve said before that a photo provides more than just a visual image of an object, especially rail cars or locomotives. It provides context, and context is worth more than a thousand words to a modeller.

Site 1: Tim O’Connor’s Flickr Page

Tim’s been scanning his dad’s slides from the mid 1970s through early 1980; And they’re up on Flickr. Tim’s dad seems to have been pretty prolific in his photography. I look forward to seeing what else Tim might have in his Dad’s stash. (Link here)

 

Site seeing March 18

So much for catching up! I had promised to catch up on my posts after a long week of the flu; Sun Tzu was right – no plan survives first contact with an adversary (or a past time).

Site 1: BobbyPitts44 build of a flexiflow car

Over on the FreeRails forum (Link Here) there’s a brief discussion on the work done to take what is essentially a 1960s era toy freight car and turn it into a scratchbuilding masterpiece.

While the forum does not have a lot of information on the build, luckily his Flickr site does. Everything is back – to – front, but there is some really amazing work there to be viewed.

View the Flickr site (Link here)

It’s great work and well worth a view.

Exhibition Report – Labour Day Weekend March 7-9

In Victoria there are two exhibitions (that I am aware of) on the Labour Day Long Weekend (March 7-9). First is the very large exhibition at Sandown Racecourse; the second is the great little exhibition at Kyneton.

On Saturday March 7 the kids and I decided to head off to Kyneton only, as there was also a trade fair on showcasing all of the Ye Olde trades that my son loves.

Having finally gotten the video uploaded today on youtube, I hope you enjoy the overview of the show.

This is one of the best little shows around in regional Victoria. It is easily doable by public transport, with a nice walk into town from the railway station.  The food in town is really good, with a lot of great eateries.

If you are driving it is easy to get to, taking us only about an hour from Ballarat; roughly the same time from Melbourne. Quicker from Bendigo.

Site seeing – March 9

Introduction

All of last week I was sicker than could be with the current Ballarat flu bug. I am almost over it just in time to see the cooler Autumn weather really kick in. As a result of the dreaded lurgy I did not feel in the mood to model or post or do anything beyond making a buck. The next few posts are a catch up from the last week and should bring me back up to speed.

Site 1: Trevor Marshall’s ‘The Peterboro Project

With the current layout build under way, I’ve looked about for inspiration for the scenic treatment. In both the model and the prototypical sense I’ve found inspiration for the look as well as the overall design. Today’s site is a source of my inspiration. I hope that you enjoy looking it over as much as I have.

Trevor’s S Scale Port Rowan layout has been featured here before. Before this S Scale masterpiece there was an HO Scale masterpiece – The Peterboro Project. In 2006 he and a friend, intrigued by the Free-mo modular standard, decided to build a module.

Not just any module though, this was a complete layout module set, that could then be joined to other modules with like-minded Freemo modellers. While the layout itself is fantastic, the experiment did not work out for Trevor and his friend. The layout .

However, the pictures of the layout still exist, and are very worthwhile to review.

Enjoy

Site seeing – March 7

Introduction

Lance Mindheim is a force in the design of operational layouts. Today’s site seeing tour takes us to an article on his views and to his new website (built on WordPress no less).

Site 1: Railroad Model Craftsmen

In this article (offsite link) Lance talks about the play value in our layouts, and how without the play value, the layout will in the long run fail to please.

Site 2: Lance Mindheim’s new site

Lance has moved his site (offsite link) across to a new platform that finally allows searching. He’ll be updating and moving older content across to the new site over time. But for the moment the link I’ve provided takes you straight to the blog. This is where most of the content is right now.

Site seeing – March 5

It’s O scale day! And today there are resources everywhere.

One of the best modellers out there today, in O scale, is Mike Cougill. Mike’s been a railroad modeller for over 40 years and been actively involved in the hobby press for a long time. Mike’s written magazine articles, a regular column and been the editor of O Scale Trains Magazine before starting a new company, OST Publications. Mike’s partner in the new business  passed away in 2013 and he’s run the company since.

Site 1: OST Publications

The aspect of OST Publications (link here) approach that I like most is a focus on doing great work, and thinking things through to yourself as a modeller. I have no interest in any of the sites that I bring up while ‘Site seeing’ except as a participant, or satisfied customer.

Among the best areas of the site are the free downloads. I’ve since bought a couple of his ‘Missing conversation’ series e-books and I just saw another one on scratchbuilding that I’m going to buy tonight once I’ve finished writing this post.

Site 2: Proto48 Modeller

More of a resource centre for those modelling in Proto48 (finescale 1/48th O Scale) I like the site’s approach to sharing information on manufacturers and, suppliers and publishers that are specific to Proto48. I am simply too lazy to model to this level, however, I do like to see the skills of others and to gain ideas from them about how to make my modelling more acceptable to me.

There are a lot of resources here, along with articles and lots of links. Enjoy

Resources:

OST Publications

  • Detailing Track – Techniques For Modeling Prototypical Looking Track (Link)
  • The free guides – special editions of ‘The Missing Conversation’ eBooks (Link)

Proto48 Modeler

  • Articles and Tips (Link)
  • A condensed eBook by Mike Cougill (PDF for download) (link)

Site seeing – March 3

I’ve said it before that I love the Internet – when I need information on a specific locomotive or car I can find it at a moments notice.

Site 1: The Diesel Detailer

One of the best US focused locomotive sites on the web. This site is especially useful for modellers (link here). There are boards for all levels of diesel modellers and those interested in improving their modelling.

There are boards for specific diesel manufacturers, Alco, EMD, etc. with more boards by generation also. So if you need a second generation (Dash-2) model there’s a board for that too.

When you get a chance take a look and let me know what you think.